How To Create Signal Chain on qu-32 (Step-By-Step)

In today’s article I will be giving you step-by-step guides on how to create signal chain on qu-32.

A signal chain is the path that an audio signal takes from the source to the output.

A qu-32 is a digital mixer that has 32 input channels and 32 output channels.

Table of Contents

Here are some steps to create a signal chain on qu-32:

Step 1:

Connect your audio sources (such as microphones, instruments, or playback devices) to the input sockets on the rear panel of the qu-32.

You can use the XLR, TRS, or RCA connectors depending on the type of source.

Make sure to use the appropriate cables and adapters.

Step 2:

Turn on the qu-32 and press the Home key to access the main screen.

You can see the input channels on the left side of the screen and the output channels on the right side.

You can also use the touch screen or the rotary encoders to adjust the settings of each channel.

Step 3:

3. Select an input channel by pressing the Sel key on the channel strip.

You can then use the processing section on the right side of the screen to adjust the gain, EQ, compressor, gate, and insert effects of the channel.

You can also use the faders and the Mute and PAFL keys to control the level and monitoring of the channel.

Step 4:

To send the input channel to an output channel, press the Mix key on the output channel strip.

You can then use the faders to adjust the send level of each input channel to the output channel.

You can also use the processing section to adjust the EQ, compressor, limiter, and insert effects of the output channel.

You can also use the Mute and PAFL keys to control the level and monitoring of the output channel.

Step 5:

Repeat steps 3 and 4 for each input and output channel that you want to use in your signal chain.

You can also use the routing matrix, the DCA groups, the mute groups, and the soft keys to customize your signal chain further.

You can also use the USB port to record or playback audio from a computer or a USB drive.

Step 6:

To save your signal chain settings, press the Setup key and then select the Scenes tab.

You can then use the Store, Recall, and Edit buttons to save, load, or modify your scenes.

You can also use the Library button to access the presets and the Safes button to protect your settings from being overwritten.

I hope this article helps you with your query about How To Create Signal Chain on qu-3.

FAQs about how to create signal chain on qu-32

Q: What is a qu-32?

A: A qu-32 is a digital mixer that has 32 input channels and 32 output channels. It also has a touch screen, a USB port, a dSNAKE port, and a ME port. It allows you to adjust the settings and effects of each channel and send them to different outputs.

Q: How do I connect my audio sources to the qu-32?

A: You can connect your audio sources (such as microphones, instruments, or playback devices) to the input sockets on the rear panel of the qu-32. You can use the XLR, TRS, or RCA connectors depending on the type of source. Make sure to use the appropriate cables and adapters.

Q: How do I select and adjust an input channel on the qu-32?

A: You can select an input channel by pressing the Sel key on the channel strip. You can then use the processing section on the right side of the screen to adjust the gain, EQ, compressor, gate, and insert effects of the channel. You can also use the faders and the Mute and PAFL keys to control the level and monitoring of the channel.

Q: How do I send an input channel to an output channel on the qu-32?

A: You can send an input channel to an output channel by pressing the Mix key on the output channel strip. You can then use the faders to adjust the send level of each input channel to the output channel. You can also use the processing section to adjust the EQ, compressor, limiter, and insert effects of the output channel.

Q: How do I save and recall my signal chain settings on the qu-32?

A: You can save and recall your signal chain settings by using the scenes feature. You can press the Setup key and then select the Scenes tab. You can then use the Store, Recall, and Edit buttons to save, load, or modify your scenes.